Hole Opener
Fixed Diameter Hole Opener is used for enlarging the drilling hole, which is applies to Onshore and Offshore oilfield industry.
Cutters available:
SM: soft to medium formation
MH: medium to hard formation
XH: hard formation
Please specify when ordering:
Size, Cutter types ( or formation), Connections.
SM MH XH
Technical Parameters -- Hole Opener
|
Model |
Hole open diameter |
Qty of cutters |
Min.Pilot hole |
Fishing neck diameter |
I.D. |
|
(Box) |
Overall Length |
KKQ311 |
12 1/4" |
3 |
8 1/2" |
8" |
1 1/2" |
6 5/8REG |
6 5/8REG |
55" |
KKQ406 |
16" |
3 |
10" |
9 1/2" |
2 1/4" |
7 5/8REG |
6 5/8REG |
59" |
KKQ444 |
17 1/2" |
3 |
10" |
9 1/2" |
2 1/4" |
7 5/8REG |
6 5/8REG |
59" |
KKQ559 |
22" |
3 |
12 3/4" |
9 1/2" |
2 1/4" |
7 5/8REG |
6 5/8REG |
69" |
KKQ584 |
23" |
3 |
12 3/4" |
8" |
3" |
7 5/8REG |
6 5/8REG |
69" |
KKQ610 |
24" |
3 |
14" |
10" |
3" |
7 5/8REG |
7 5/8REG |
69" |
KKQ660 |
26" |
3 |
17 1/2" |
10" |
3" |
7 5/8REG |
7 5/8REG |
69" |
KKQ4-914 |
36" |
4 |
26" |
10" |
3 1/2" |
7 5/8REG |
7 5/8REG |
87" |
Roller Reamer
Roller reamer is designed for various reaming operation. It can be used in hard formation or abrasive formation, in order to keep the standard hole size. When the bit size is under the standard size, it can ream the well bottom size to standard hole size. Whether drilling the vertical well or directional well, it can make the bit or casing come into the normal hole size. The features of roller reamer are small frictional resistance with well wall, strong abrasive resistance and long life.
Cutters available:
Type T: Soft formation
Type F: Medium hard formation
Type B: Hard formation
Please specify when ordering:
Size, Cutter types ( or formation), Connections.
Type B Type F Type T
Technical Parameters -- Roller Reamer