- Hydraulic Cylinder
- 2017-11-18 12:00
- Hydraulic CylinderOur Hydraulic Cylinder are forged of quality alloy steel and made via normalizing. Each piece has been tested by flaw detection before it is sent out of the factory. Our products have high precision, long service life and easy to change.
- Hole Opener And Reamer ( Hole Opener, Roller Reamer )
- 2017-11-18 04:47
- Hole Opener Fixed Diameter Hole Opener is used for enlarging the drilling hole, which is applies to Onshore and Offshore oilfield industry. Cutters available:SM: soft to medium formationMH: medium to hard formationXH: hard formation Please specify when or
- Spray Pump
- 2017-11-04 02:42
- Spray Pump The spray pump adapt single-stage, single suction, horizontal cantilever centrifugal pump. It is mainly used for spraying, cooling, lubricating the liner and piston ofdrilling mud pump , it can be used for transmitting the clean water for which
- Type SLX Elevator ( Side Latch Elevator )
- 2017-10-30 11:44
- Type SLX ElevatorType SLX side door elevator with square shoulder are suitable for handling tubing, casing,drill pipe and drill collar in oil and natural gas drilling, well construction.Standard: API Spec 8CTechnical Parameter If you have any further requ
- Christmas Tree ( X-mas tree )
- 2017-10-27 07:00
- Christmas Tree Gaonton company could provide HH classwellheadandoilgas Christmas Tree ,fracture wellheadand oilgas Christmas Tress, electric pump wellhead and oil x-mas tree, compact and integrated wellhead and oil x-mas tree etc. It is applicable to offs
- Piston Assy, Piston Assembly
- 2017-10-16 18:40
- Piston Assembly:Piston Assemblyis made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined. For easy maintenance, single row radial cylindrical roller bearing with double ribbed outer ring is used. The pinion
- Type DDZ Elevator ( Center Latch Elevator )
- 2017-10-07 09:11
- Type DDZ ElevatorDDZ series elevators are center latch elevator with 18 degree taper shoulder ,applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons. The size ranges fromto .Standard: API Spec 8C.Technica
- Clamp Assembly
- 2017-10-07 00:50
- Clamp Assembly: The function of Clamp Assembly mainly in connecting the intermediate draw bar in power end system and the piston rod in hydraulic end system of thewell drilling slurry pump . It is forged and processed from 35CrMo. We can manufacture thecl
- Lift Cap (Lift Nubbin, Lift Bail, Lift Plug, Lifting Cap)
- 2017-09-24 03:01
- Lift Cap Lift Cap is also calledLift Nubbin, Lift Bail, or Lift Plug . It is the tools for lifting ofdrilling tools , such asdrill collars, stabilizers,etc. In the Oil and Gas exploration drilling operation.Size: All size Please specify when ordering: Tec
- Junk Sub
- 2017-09-22 02:18
- Junk Sub During drilling process, drilling fishing cup is applied mainly for fishing of shivers and fallen objects such as carbide tooth, drill bit and bearing which can not be carried out of hole by conventional fluid circulation, etc. It possesses impor
- RTTS Safety Joint
- 2017-09-14 17:46
- RTTS Safety Joint RTTS Safety Jointis a king of security tool. When a packer is stuck, you can use RTTS safety joint to help raise pipe string above the safety joint and make this safety joint disengaged, exerting a pulling force to the pipe string and pu
- Die Collars
- 2017-08-07 03:25
- Die Collars TheDie Collaris a special tapping andfishing tool , but its operation is from the outside wall of the fallen pipes, such asoil tubinganddrill pipe . It is more efficacious for those fallen sleeve substances without hole for with blocked hole.P
- Casing Head, Tubing Head
- 2017-07-13 10:01
- Casing Head Casing head is used to fixed well drilling wellhead, connectingwellhead casing string , to support the gravity of the technology of casing and casing, seal the annular space between the tubes of each layer, to install anti preventer, tubing he